4" - 10" Rewindable Water Filled Motors - W Series
Deep well rewindable water filled submersible motor is a robust, high-performance electric motor designed for driving submersible pumps in deep water wells. The motor is filled with clean potable water, which acts as both coolant and lubricant for bearings, ensuring efficient thermal management and continuous operation.
Built with high-grade materials, it includes shaft seals and sand slingers to prevent contamination, along with heavy-duty thrust bearings to handle high axial loads. A pressure-equalizing rubber diaphragm maintains internal pressure balance. Designed as per NEMA and international standards for wide compatibility.
Applications
- Groundwater extraction
- Municipal & industrial water supply
- Agricultural irrigation
- Mining & construction dewatering
- Pressure boosting systems
- Fountains & livestock watering
- Fire-fighting systems
- Coal Bed Methane (CBM)
Key Features
- High efficiency
- Rewindable motor
- Corrosion-resistant stainless steel motor body
- Heavy-duty thrust bearings
- Special design for hot water
- Easy dismantling and repair
All you need to know about – 4″ Rewindable Water Filled Motors – W Series | 60Hz
Specifications
| Nominal Diameter | 4″ |
| Power Range | 0.5 – 10 HP |
| Speed | 3450 rpm |
| Voltage (Three Phase) | 230V, 380V & 460V, 60Hz |
| Maximum Down Thrust Load (0.5–2 HP) | 800 lbs |
| Maximum Down Thrust Load (3–10 HP) | 1500 lbs |
| Type of Duty | S1 Continuous Duty |
| Degree of Protection | IP68 |
| Insulation Class | Y |
| Maximum Liquid Temperature | 86°F |
| Minimum Cooling Flow | 0.5 ft/s |
| Maximum Starts per Hour | 20 |
Material Of Construction
| Material of Construction (MOC) | Type A & N |
Deep well rewindable water filled submersible motor is a robust, high-performance electric motor designed for driving submersible pumps in deep water wells. These motors operate reliably in demanding underwater environments and are widely used in residential, agricultural irrigation, municipal, and industrial water supply systems.
The motor is filled with clean potable water, which acts as both coolant and lubricant for bearings, ensuring optimal thermal management. Shaft seals and sand slingers prevent entry of contaminants, while heavy-duty thrust bearings handle high axial loads. A pressure-equalizing rubber diaphragm maintains internal balance. Designed as per NEMA and international standards for compatibility.
Applications
- Groundwater extraction
- Municipal & industrial water supply
- Agricultural irrigation
- Mining & construction dewatering
- Pressure boosting systems
- Fountains & livestock watering
- Fire-fighting systems
- Coal Bed Methane (CBM)
Key Features
- High efficiency
- Rewindable motor
- Corrosion-resistant stainless steel motor body
- Heavy-duty thrust bearings
- Special design for hot water
- Easy dismantling and repair
All you need to know about – 6″ Rewindable Water Filled Motors – W Series | 60Hz
Specifications
| Nominal Diameter | 6″ |
| Power Range (Three Phase) | 3 – 60 HP |
| Speed | 3450 rpm |
| Voltage (Three Phase) | 230V, 380V & 460V, 60Hz |
| Maximum Down Thrust Load (5–30 HP) | 3500 lbs |
| Maximum Down Thrust Load (35–60 HP) | 6000 lbs |
| Type of Duty | S1 Continuous Duty |
| Degree of Protection | IP68 |
| Insulation Class | Y |
| Maximum Liquid Temperature (Standard) | 86°F |
| Maximum Liquid Temperature (Optional) | 140°F |
| Minimum Cooling Flow | 0.5 ft/s |
| Maximum Starts per Hour | 15 |
Material Of Construction
| Material of Construction (MOC) | Type A, N, S & T |
Deep well rewindable water filled submersible motor is a robust, high-performance electric motor designed specifically for driving submersible pumps installed in deeper water wells. These motors operate reliably in demanding underwater environments and are widely used in residential, agricultural irrigation, municipal, and industrial water supply systems.
The motor is filled with clean potable water, which acts as both coolant and lubricant for radial and thrust bearings, ensuring optimal thermal management. Shaft seals and sand slingers prevent entry of contaminants. Heavy-duty thrust bearings handle high axial loads, and a pressure-equalizing rubber diaphragm maintains internal balance. Designed as per NEMA and international standards for compatibility.
Applications
- Municipal and industrial water supply
- Agricultural irrigation
- Mining and construction dewatering
- Pressure boosting systems
- Fountains & livestock watering
- Fire-fighting systems
Key Features
- High efficiency
- Rewindable motor
- Corrosion-resistant stainless steel motor body
- Heavy-duty thrust bearings
- Special design for hot water
- Easy dismantling and repair
All you need to know about – 7″ Rewindable Water Filled Motors – W Series | 60Hz
Specifications
| Nominal Diameter | 7″ |
| Power Range | 50 – 100 HP |
| Speed | 3450 rpm |
| Voltage (Three Phase) | 380V & 460V, 60Hz |
| Maximum Down Thrust Load (50 & 60 HP) | 10000 lbs |
| Maximum Down Thrust Load (75–100 HP) | 12500 lbs |
| Type of Duty | S1 Continuous Duty |
| Degree of Protection | IP68 |
| Insulation Class | Y |
| Maximum Liquid Temperature (Standard) | 86°F |
| Maximum Liquid Temperature (Optional) | 140°F |
| Minimum Cooling Flow | 0.5 ft/s |
| Maximum Starts per Hour | 10 |
Material Of Construction
| Material of Construction (MOC) | Type B |
Deep well rewindable water filled submersible motor is a robust, high-performance electric motor designed specifically for driving submersible pumps installed in deeper water wells. These motors operate reliably in demanding underwater environments and are widely used in residential, agricultural irrigation, municipal, and industrial water supply systems.
The motor is filled with clean potable water, which acts as both coolant and lubricant for radial and thrust bearings, ensuring optimal thermal management. Shaft seals and sand slingers prevent entry of contaminants. Heavy-duty thrust bearings handle high axial loads, and a pressure-equalizing rubber diaphragm maintains internal balance. Designed as per NEMA and international standards for compatibility.
Applications
- Municipal and industrial water supply
- Agricultural irrigation
- Mining and construction dewatering
- Pressure boosting systems
- Fountains & livestock watering
- Fire-fighting systems
Key Features
- High efficiency
- Rewindable motor
- Corrosion-resistant stainless steel motor body
- Heavy-duty thrust bearings
- Special design for hot water
- Easy dismantling and repair
All you need to know about – 8″ Rewindable Water Filled Motors – W Series | 60Hz
Specifications
| Nominal Diameter | 8″ |
| Power Range | 50 – 150 HP |
| Speed | 3450 rpm |
| Voltage (Three Phase) | 380V & 460V, 60Hz |
| Maximum Down Thrust Load (50 & 60 HP) | 10000 lbs |
| Maximum Down Thrust Load (75–100 HP) | 12500 lbs |
| Type of Duty | S1 Continuous Duty |
| Degree of Protection | IP68 |
| Insulation Class | Y |
| Maximum Liquid Temperature (Standard) | 86°F |
| Maximum Liquid Temperature (Optional) | 140°F |
| Minimum Cooling Flow | 0.5 ft/s |
| Maximum Starts per Hour | 8 |
Material Of Construction
| Material of Construction (MOC) | Type B, S & T |
Deep well rewindable water filled submersible motor is a robust, high-performance electric motor designed specifically for driving submersible pumps installed in deeper water wells. These motors operate reliably in demanding underwater environments and are widely used in residential, agricultural irrigation, municipal, and industrial water supply systems.
The motor is filled with clean potable water, which acts as both coolant and lubricant for radial and thrust bearings, ensuring optimal thermal management. Shaft seals and sand slingers prevent entry of contaminants. Heavy-duty thrust bearings handle high axial loads, and a pressure-equalizing rubber diaphragm maintains internal balance. Designed as per NEMA and international standards for compatibility.
Applications
- Municipal and industrial water supply
- Agricultural irrigation
- Mining and construction dewatering
- Pressure boosting systems
- Fountains & livestock watering
- Fire-fighting systems
Key Features
- High efficiency
- Rewindable motor
- Corrosion-resistant stainless steel motor body
- Heavy-duty thrust bearings
- Special design for hot water
- Easy dismantling and repair
All you need to know about – 10″ Rewindable Water Filled Motors – W Series | 60Hz
Specifications
| Nominal Diameter | 10″ |
| Power Range | 150 – 250 HP |
| Speed | 3450 rpm |
| Voltage (Three Phase) | 380V & 460V, 60Hz |
| Maximum Down Thrust Load (150–250 HP) | 16860 lbs |
| Type of Duty | S1 Continuous Duty |
| Degree of Protection | IP68 |
| Insulation Class | Y |
| Maximum Liquid Temperature (Standard) | 86°F |
| Maximum Liquid Temperature (Optional) | 140°F |
| Minimum Cooling Flow | 0.5 ft/s |
| Maximum Starts per Hour | 8 |
Material Of Construction
| Material of Construction (MOC) | Type B, S & T |
How can we support you?
