HORIZONTAL OPENWELL SUBMERSIBLE PUMPS
CSM Series
PLANO Series
Selfy+ Series
CSM Series
The CSM series of CRI’s Openwell Submersible Pumps are specially designed water-lubricated bearings that are used to withstand the axial thrust loads with minimum wear and tear. CRI’s Submersible pumps offer exceptional value and reliable performance with the double-side carbon pads, which facilitate not only higher wear resistance but also negligible suction and priming problems. Ideal for offering functionality under vast water pressure fluctuations, CRI brings a product that uses significantly less power, as the fluid they pump is pushed and not pulled.
Applications
- Industries
- Agricultural
- Hotels
- Apartments
Key Features
- Heavy cooling design
- High cooling motor
- Wide voltage operation
- No need for a pump house
- No suction and priming problem
- Vast applications: irrigation, agriculture, domestic, industrial, garden, rural water supply
All you need to know about – Horizontal Openwell Submersible Pumps (CSM Series)
Specifications
| Power Range | 2.2 kW – 15 kW |
| Speed | 2900 rpm |
| Version | Single Phase – 200-240V; Three Phase – 380-415V, 50Hz AC Supply |
| Maximum Total Head | 153 metres |
| Maximum Flow Rate | 54 lps |
| Degree of Protection | IP 58 |
| Degree of Rotation | Electrically Reversible |
| Method of Starting | Direct On Line (D.O.L), Star Delta (SD) |
| Type of Duty | 50, 65, 80, 100 & 125 mm |
| Maximum Starts Per Hour | 10 times |
Material Of Construction
| Component | Material |
|---|---|
| Rear Cover / Bracket | Cast Iron |
| Stator Shell | Cast Iron |
| Shaft | SS 410 / EN – 8 |
| Impeller | Cast Iron / SS 410 / Bronze |
| Pump Casting | Cast Iron |
| Shaft Seal | Nitrile Butyl Rubber |
| Thrust Assembly | SS 420 with Graphite Carbon |
| Diaphragm | High Nitrile Butyl Rubber |
| Journal Bearings | LTB – 4 / LTB – 5 / Carbon |
PLANO Series
CRI brings to you the PLANO Series of Horizontal Openwell Submersible Pumpsets. Engineered to offer optimal functionality underwater, the rigid construction has been created to withstand a widely fluctuating water level. These pumps deliver a consistent water supply, showcasing our commitment to exceptional value and reliable performance in water management. “O” rings, oil seals and polymers seal the motor, preventing any ingression of sand and water even in wide voltage fluctuations.
Applications
- Industries
- Agricultural
- Hotels
- Apartments
Key Features
- Heavy cooling design
- High cooling motor
- Wide voltage operation
- No need for a pump house
- No suction and priming problem
- Vast applications: irrigation, agriculture, domestic, industrial, garden, rural water supply
All you need to know about – Horizontal Openwell Submersible Pumps (Plano Series)
Specifications
| Power Range | 0.37 kW – 1.5 kW (0.5HP – 2HP) |
| Speed | 2880 RPM |
| Version | Single Phase 220 – 240 V, 50Hz, A.C. Supply |
| Maximum Total Head | Up to 45 metres |
| Maximum Flow Rate | Up to 8.5 lps (30.6 m³/hr) |
| Type of Duty | S1 (Continuous) |
Material Of Construction
| Component | Material |
|---|---|
| Rear cover / Bracket | Cast iron |
| Stator Shell | Cast Iron |
| Shaft | SS 410 / EN – 8 |
| Impeller | Cast Iron / SS 410 / Bronze |
| Pump Casting | Cast Iron |
| Shaft Seal | Nitrile Butyl Rubber |
| Thrust assembly | SS 420 with graphite carbon |
| Diaphragm | High Nitrile Butyl rubber |
| Journal Bearings | LTB – 4 / LTB – 5 / Carbon |
Selfy+ Series
The Selfy+ series is a new advancement in horizontal open well submersible pumps, designed to provide homeowners with both reliable water supply and peace of mind. With the convenience of a 1hp submersible pump and the strength of a 1.5 hp submersible pump, the Selfy+ offers a perfect balance of simplicity and power. Whether you need it for irrigation or daily water usage, this pump delivers unmatched efficiency and is considered one of the best submersible pump options for hassle-free and dependable water supply at home.
Applications
- Industries
- Agricultural
- Hotels
- Apartments
Key Features
- High operating efficiency
- Motor is designed with higher cooling effect to ensure longer life
- Easy to dismantle and repair
- Available in SS304, CI, and Noryl impellers
- Available with 3 metre and 10 metre cable length
All you need to know about – Horizontal Openwell Submersible Pumps (Selfy+ Series)
Specifications
| Power Range | 0.37 kW – 2.2 kW (0.5 HP – 3 HP) |
| Version | Single phase 220 – 240V, Three phase 380 – 415V, 50Hz AC Supply |
| Maximum Head | Up to 56.5 metres |
| Maximum Flow Rate | Up to 17 lps (61.2 m³/hr) |
Material Of Construction
| Component | Material |
|---|---|
| Impeller | SS 304 / Noryl / Cast Iron |
| Bracket | Cast Iron |
| Casing | Cast Iron |
| Motor Shaft | SS 410 |
| Motor Body | SS 304 |
You might also like
How can we support you?
